Приветствую

Давно я не парил вам мозг результатами деятельности моих кривых ручонок.
На сей раз история такая
Стоял у меня давно MPD 5.3, чудно работал, шифрование было отключено.
Решил я включить его, начал конфиг менять... потом покрутился - написал новый.
Не работает, ошибок много.
Совсем старого конфига не осталось - не сразу сделал копию.
Ту что сделал - уже не работала.
Крутился-крутился - переставил из портов, конфиг дефолтный.
Запускается хорошо, но при попытке подключения - ошибка 800.
Гугл курил, не вставляет.

Конфиг и ошибка:

startup:
    # configure mpd users
    set user foo bar admin
    set user foo1 bar1
    # configure the console
    set console self 127.0.0.1 5005
    set console open
    # configure the web server
    set web self 0.0.0.0 5006
    set web open

#
# Default configuration is "dialup"

default:
    load pptp_server
pptp_server:
#
# Mpd as a PPTP server compatible with Microsoft Dial-Up Networking clients.
#
# Suppose you have a private Office LAN numbered 192.168.1.0/24 and the
# machine running mpd is at 192.168.1.1, and also has an externally visible
# IP address of 1.2.3.4.
#
# We want to allow a client to connect to 1.2.3.4 from out on the Internet
# via PPTP.  We will assign that client the address 192.168.1.50 and proxy-ARP
# for that address, so the virtual PPP link will be numbered 192.168.1.1 local
# and 192.168.1.50 remote.  From the client machine's perspective, it will
# appear as if it is actually on the 192.168.1.0/24 network, even though in
# reality it is somewhere far away out on the Internet.
#
# Our DNS server is at 192.168.1.3 and our NBNS (WINS server) is at 192.168.1.4.
# If you don't have an NBNS server, leave that line out.
#

# Define dynamic IP address pool.
    set ippool add pool1 192.168.177.245 192.168.177.254

# Create clonable bundle template named B
    create bundle template B
    set iface enable proxy-arp
    set iface idle 1800
    set iface enable tcpmssfix
    set ipcp yes vjcomp
# Specify IP address pool for dynamic assigment.
    set ipcp ranges 192.168.177.1/32 ippool pool1
    set ipcp dns 192.168.177.1
#    set ipcp nbns 192.168.177.1
# The five lines below enable Microsoft Point-to-Point encryption
# (MPPE) using the ng_mppc(8) netgraph node type.
#    set bundle enable compression
#    set ccp yes mppc
#    set mppc yes e40
#    set mppc yes e128
#    set mppc yes stateless
# Create clonable link template named L
    create link template L pptp
# Set bundle template to use
    set link action bundle B
# Multilink adds some overhead, but gives full 1500 MTU.
    set link enable multilink
    set link yes acfcomp protocomp
    set link no pap chap
    set link enable chap
# We can use use RADIUS authentication/accounting by including
# another config section with label 'radius'.
#    load radius
    set link keep-alive 10 60
# We reducing link mtu to avoid GRE packet fragmentation.
    set link mtu 1460
# Configure PPTP
        set pptp self 0.0.0.0
# Allow to accept calls
        set link enable incoming

Nov 11 20:10:36 vsrouter mpd: Multi-link PPP daemon for FreeBSD
Nov 11 20:10:36 vsrouter mpd: 
Nov 11 20:10:36 vsrouter mpd: process 1678 started, version 5.3 (root@vsrouter.hostel.nstu.ru 17:48 10-Nov-2009)
Nov 11 20:10:36 vsrouter mpd: CONSOLE: listening on 127.0.0.1 5005
Nov 11 20:10:36 vsrouter mpd: web: listening on 0.0.0.0 5006
Nov 11 20:10:36 vsrouter mpd: PPTP: waiting for connection on 0.0.0.0 1723
Nov 11 20:10:46 vsrouter mpd: [L-1] Accepting PPTP connection
Nov 11 20:10:46 vsrouter mpd: [L-1] Link: OPEN event
Nov 11 20:10:46 vsrouter mpd: [L-1] LCP: Open event
Nov 11 20:10:46 vsrouter mpd: [L-1] LCP: state change Initial --> Starting
Nov 11 20:10:46 vsrouter mpd: [L-1] LCP: LayerStart
Nov 11 20:10:46 vsrouter mpd: [L-1] PPTP: attaching to peer's outgoing call
Nov 11 20:10:46 vsrouter mpd: [L-1] PPTP: can't attach pptpgre node: Invalid argument
Nov 11 20:10:46 vsrouter mpd: [L-1] PPTP call cancelled in state CONNECTING
Nov 11 20:10:46 vsrouter mpd: [L-1] Link: DOWN event
Nov 11 20:10:46 vsrouter mpd: [L-1] LCP: Close event
Nov 11 20:10:46 vsrouter mpd: [L-1] LCP: state change Starting --> Initial
Nov 11 20:10:46 vsrouter mpd: [L-1] LCP: LayerFinish
Nov 11 20:10:46 vsrouter mpd: [L-1] LCP: Down event
Nov 11 20:10:46 vsrouter mpd: [L-1] Link: SHUTDOWN event
Nov 11 20:10:46 vsrouter mpd: [L-1] Link: Shutdown
Nov 11 20:12:54 vsrouter mpd: [L-1] Accepting PPTP connection
Nov 11 20:12:54 vsrouter mpd: [L-1] Link: OPEN event
Nov 11 20:12:54 vsrouter mpd: [L-1] LCP: Open event
Nov 11 20:12:54 vsrouter mpd: [L-1] LCP: state change Initial --> Starting
Nov 11 20:12:54 vsrouter mpd: [L-1] LCP: LayerStart
Nov 11 20:12:54 vsrouter mpd: [L-1] PPTP: attaching to peer's outgoing call
Nov 11 20:12:54 vsrouter mpd: [L-1] PPTP: can't attach pptpgre node: Invalid argument
Nov 11 20:12:54 vsrouter mpd: [L-1] PPTP call cancelled in state CONNECTING
Nov 11 20:12:54 vsrouter mpd: [L-1] Link: DOWN event
Nov 11 20:12:54 vsrouter mpd: [L-1] LCP: Close event
Nov 11 20:12:54 vsrouter mpd: [L-1] LCP: state change Starting --> Initial
Nov 11 20:12:54 vsrouter mpd: [L-1] LCP: LayerFinish
Nov 11 20:12:54 vsrouter mpd: [L-1] LCP: Down event
Nov 11 20:12:54 vsrouter mpd: [L-1] Link: SHUTDOWN event
Nov 11 20:12:54 vsrouter mpd: [L-1] Link: Shutdown