#1 02.05.11 16:15
BSOD win7
Выкидывает BSOD с такой ошибкой
0x0000008e (0xc0000005, 0x8d9f34e8, 0xa5c729e8, 0x00000000)
После него появляется не запуск Windows, а восстановление,будто после спящего режима.Автоматически запускаются толь основные программы: НОД, Catalyst СС.Не запускается автоматом пунто свитчер и Daemon, причем последний вообще выдает ошибку,и вылетает.Попытка удалить и поставить заново также выдает ошибку и и закрывает установщик.В папке minidump никаких отчетов нет.
Конф:AsusM3A78/Athlon64X2 5400+/2Гб/Radeon 3870,512/
Исправлено Lester (02.05.11 16:15)
Offline
#2 02.05.11 17:48
Re: BSOD win7
После удаления лежафших там(старых) файлов появились новый с таким содержимым.
Сначала:
Код::
If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x1000008e (0xc0000005, 0x82ebd7d0, 0xa25a3b39, 0x00000000) *** ntkrnlpa.exe - Address 0x82ebd7d0 base at 0x82c1e000 DateStamp 0x4a5bc007
Потом,буквально через 6 минут после предыдущего:
Код::
If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x00000051 (0x00000001, 0x89a1b008, 0x00ddb000, 0x00000374) *** ntkrnlpa.exe - Address 0x82cfbd10 base at 0x82c1f000 DateStamp 0x4a5bc007
После начал БСОДить сразу после загрузки с таким сообщением:
Код::
A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: halmacpi.dll PAGE_FAULT_IN_NONPAGED_AREA If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x00000050 (0xa60bb000, 0x00000000, 0x82e56c54, 0x00000000) *** halmacpi.dll - Address 0x82c23b29 base at 0x82c1e000 DateStamp 0x4a5bbf07
Сразу после него,тоже после загрузки
Код::
A problem has been detected and Windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: ntkrnlpa.exe PAGE_FAULT_IN_NONPAGED_AREA If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode. Technical Information: *** STOP: 0x00000050 (0xa6fb6000, 0x00000000, 0x82e42c54, 0x00000000) *** ntkrnlpa.exe - Address 0x82cc68e3 base at 0x82c41000 DateStamp 0x4a5bc007
Ругается на файл ntkrnlpa.exe,причем три раза и один раз на halmacpi.dll
Сейчас в безопасном режиме вроде работает.
Исправлено Lester (02.05.11 17:49)
Offline
